Publication 1761-UM006A-EN-P - February 2001
ENI Configuration (Node 248 to 254) 4-3
Save to ENI RAM or ENI ROM
You must save the configurations you have set. Click ENI RAM for
temporary setups or ENI ROM to permanently save your settings. If
you do not save the settings, they will revert to “out-of-box” on the
next power-up.
E-Mail Settings
Use the Email screen to fill in the information for e-mail messages.
E-mail servers are described on page 4-15. See chapter 6 for
information on the “To” and “From” strings.
TIP
If you want to obtain the TCP/IP information via
BOOTP, you must do that separately from the ENI
Configuration Utility. See Appendix B.
To Next Page
Loading...
