28 Rockwell Automation Publication 750-IN001O-EN-P - October 2014
Chapter 2 Prepare for Installation
Figure 7 - Floor Mount Drive-assembly Access Panels - All Enclosure Types (IP20, NEMA/UL Type 1
Shown)
When covers are replaced:
• Recommended torque = 2.8 N•m (25.0 lb•in)
• Recommended screwdriver = 6.4 mm (0.25 in.) flat or T25 Hexalobular
No. Description
➊ Left Front Converter Cover with Side Shield (AC Input Drives)
➋ Right Front Converter Cover (No Control Pod)
➌ Left Front Converter Cover with Side Shield (Common DC Input Drives)
➍ Right Front Converter Cover (With Control Pod)
➎ Inverter Front Cover with Side Shield (Common DC Input Drives)
To Next Page
Loading...
Need help?
General
