Need help?Do you have a question about the Allen-Bradley PowerFlex 400 and is the answer not in the manual?
General| Input Voltage | 200-240VAC, 380-480VAC, 500-600VAC |
|---|---|
| Output Voltage | 0-Input Voltage |
| Output Frequency | 0-400 Hz |
| Communication | EtherNet/IP |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Short Circuit |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5-95% non-condensing |
| Enclosure Rating | IP20 |
| Horsepower | 0.5-20 HP |
| Control Method | V/Hz, Sensorless Vector Control |
Summarizes changes to the manual since a previous release.
Notes additional updates made to the manual content.
Provides an overview of the hardware components within the main input disconnect package.
Details the process for connecting input and output power wiring to the drive package.
Describes the hardware components and functionality of the 3-contactor bypass package.
Covers the input power wiring requirements and connection procedures for the bypass package.
Details the hardware components and operation of the basic bypass package.
Provides guidance on electrical installation, including input power wiring.
Discusses environmental factors and clearances for proper drive installation.
Provides instructions and safety precautions for lifting and mounting the drive.
Outlines requirements for selecting appropriate wire sizes based on codes and drive ratings.
Details specifications for power terminal blocks, including wire size ranges and torque.
Lists environmental and physical specifications for the drive packages.
Lists common replacement parts and their part numbers.
Lists replacement parts for disconnect switches and operator handles.
To Next Page
