Allen-Bradley PowerFlex 525 User Manual

Rockwell Automation Publication 520-UM001A-EN-E - February 2013 67
Programming and Parameters Chapter 3
Basic Display Group (continued)
b025 [Accum Cost Sav] Related Parameter(s): b024, P052, A555
Total approximate accumulated cost savings of the drive compared to using an across the line starter.
[Accum Cost Sav] = [Average kWh cost] x [Accum kWh Sav]
Values Default: Read Only
Min/Max: 0.0/6553.5
Display: 0.1
b026 [Accum CO2 Sav] Related Parameter(s): A555
Total approximate accumulated CO2 savings of the drive compared to using an across the line starter.
Values Default: Read Only
Min/Max: 0.0/6553.5 kg
Display: 0.1 kg
b027 [Drive Temp]
Present operating temperature of the drive heatsink (inside module).
Values Default: Read Only
Min/Max: 0/120 °C
Display: 1 °C
b028 [Control Temp]
Present operating temperature of the drive control.
Values Default: Read Only
Min/Max: 0/120 °C
Display: 1 °C
b029 [Control SW Ver]
Current drive firmware version.
Values Default: Read Only
Min/Max: 0.000/65.535
Display: 0.001

Allen-Bradley PowerFlex 525 Specifications

General

Horsepower	0.5-30 HP
kW	0.4-22 kW
Input Voltage	200-240V AC, 380-480V AC
Enclosure	IP20, NEMA/UL Type 1
Communications	EtherNet/IP
Control Methods	V/Hz, Sensorless Vector
STO	Safe Torque Off (STO)
Output Voltage	0-Input Voltage
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Storage Temperature	-40°C to 85°C (-40°F to 185°F)
Relative Humidity	5-95% non-condensing
Dimensions	Varies by model
Weight	Varies by model