Rockwell Automation Publication 6000-IN006F-EN-P - March 2018 5
Preface
Introduction
This document provides procedural information for physically unloading,
moving, and installing PowerFlex® 6000 medium voltage drives.
Who Should Use This Manual
This manual is intended for use by professional riggers, general contractors,
electrical contractors, or plant operations personnel familiar with moving and
siting heavy equipment. Specific experience with solid-state variable speed drive
equipment is NOT required for this part of the installation process, but is
mandatory for subsequent processes.
What Is Not in this Manual
This manual provides information specific for physically unloading and situating
a PowerFlex 6000 drive. It does not include project-specific, or drive-specific
topics such as:
• Dimensional Drawings and Electrical Drawings generated for each
customer’s order.
• Spare parts lists compiled for each customer’s order.
• Drive-specific technical specifications.
Refer to the following documents for additional product detail or instruction
relating to PowerFlex 6000 drives:
• PowerFlex 6000 Medium Voltage Variable Frequency Drive Shipping and
Handling Manual, publication 6000-IN008
: instructions for shipping and
handling a Medium Voltage variable frequency drive and related
equipment.
• PowerFlex 6000 Medium Voltage Variable Frequency Drive User Manual,
publication 6000-UM002
: instructions for daily recurring drive usage,
HMI interface and maintenance tasks for the product’s end-user.
• PowerFlex 6000 Medium Voltage Variable Frequency Drive Parameter
Manual, publication 6000-TD004
: detailed information on drive features,
parameters, and troubleshooting faults.
Required Supplemental
Information
This manual includes generic information about the drive cabinet layout
orientation and generic electrical connection information.
Review the project-specific Dimensional Drawings (DDs) and Electrical
Drawings (EDs) to better understand the specific drive system cabinet
orientation and wiring requirements before performing any mechanical or
electrical work. Paper copies of the DDs and EDs are placed in the document/
hardware box in the Isolation Transformer Cabinet before shipment. Contact the
local Rockwell Automation office to obtain digital copies, if required.
To Next Page
Loading...
Need help?
General
