EasyManua.ls Logo

Allen-Bradley PowerFlex 700H - Page 36

Allen-Bradley PowerFlex 700H
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 Rockwell Automation Publication 20C-PM001F-EN-P - March 2012
Chapter 2 Programming and Parameters
UTILITY
Drive Memory
197 [Reset To Defalts]
Resets parameters to the factory defaults except
parameters [Mtr NP Pwr Units], [Speed Units],
[Language], and [Param Access Lvl] (parameters
46, 79, 196 and 201).
Important: The drive will reset after a reset to
defaults.
1 “Ready” - resets all affected parameters to
the factory default based on the value of
[Voltage Class].
2 “Low Voltage” and 3 “High Voltage” will set
[Voltage Class] to “low” or “high” voltage
setting, respectively, then reset the
parameters to the factory default based on the
value of [Voltage Class].
Default:
Options:
0
0
1
2
3
“Ready”
“Ready”
“Factory
“Low Voltage”
“High Voltage
041
thru
045
047
055
062
063
069
thru
072
082
148
158
202
198 [Load Frm Usr Set]
Loads a previously saved set of parameter values
from a selected user set location in drive
nonvolatile memory to active drive memory.
Default:
Options:
0
0
1
2
3
“Ready”
“Ready”
“User Set 1”
“User Set 2”
“User Set 3”
199
199 [Save To User Set]
Saves the parameter values in active drive
memory to a user set in drive nonvolatile
memory.
Default:
Options:
0
0
1
2
3
“Ready”
“Ready”
“User Set 1”
“User Set 2”
“User Set 3”
198
200 [Reset Meters]
Resets selected meters to zero.
Default:
Options:
0
0
1
2
“Ready”
“Ready”
“MWh”
“Elapsed Time
201 [Language]
Selects the display language when using an LCD
HIM. This parameter is not functional with an LED
HIM.
Options 6, 8 and 9 are “Reserved.
Default:
Options:
0
0
1
2
3
4
5
7
10
“Not Selected”
“Not Selected”
“English
“Francais
“Español”
“Italiano”
“Deutsch”
“Português”
“Nederlands”
202 [Voltage Class]
Displays the last “Reset to Defaults” operation.
Default:
Options: 0
1
Read Only
“Low Voltage”
“High Voltage
203 [Drive Checksum]
Provides a checksum value that indicates whether
or not a change in drive programming has
occurred.
Default:
Min/Max:
Units:
Read Only
0/65535
1
File
Group
No.
Parameter Name & Description Values
Related

Other manuals for Allen-Bradley PowerFlex 700H

Related product manuals