Allen-Bradley PowerFlex 755T User Manual

Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017 133
Interface Parameters Appendix C
365 Flt Cfg Ref
Fault Configuration Reference
Set the reference for the drive if any of the following is true:
360
[Comm Flt Action] is set to 4 ‘Send Flt Cfg’ and I/O communication are disrupted.
361 [Idle Flt Action] is set to 4 ‘Send Flt Cfg’ and the controller leaves the run mode.
362 [Peer Flt Action] is set to 4 ‘Send Flt Cfg’ and Peer I/O communication are disrupted.
363
[Msg Flt Action] is set to 4 ‘Send Flt Cfg’ and Explicit Messaging for drive control is
disrupted.
Default:
Min/Max:
0
-220000000/+220000000
RW Real 0
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
Flt Cfg DL 01
Flt Cfg DL 02
Flt Cfg DL 03
Flt Cfg DL 04
Flt Cfg DL 05
Flt Cfg DL 06
Flt Cfg DL 07
Flt Cfg DL 08
Flt Cfg DL 09
Flt Cfg DL 10
Flt Cfg DL 11
Flt Cfg DL 12
Flt Cfg DL 13
Flt Cfg DL 14
Flt Cfg DL 15
Flt Cfg DL 16
Fault Configuration Datalink nn
Set the data for the parameter consuming data from datalink nn if any of the following is
true:
360
[Comm Flt Action] is set to 4 ‘Send Flt Cfg’ and I/O communication are disrupted.
361
[Idle Flt Action] is set to 4 ‘Send Flt Cfg’ and the controller leaves the run mode.
362 [Peer Flt Action] is set to 4 ‘Send Flt Cfg’ and Peer I/O communication are disrupted.
363 [Msg Flt Action] is set to 4 ‘Send Flt Cfg’ and Explicit Messaging for drive control is
disrupted.
Default:
Min/Max:
0
0/4294967295
RW 32-bit
Integer
0
Table 25 - Port 0: Parameter List (continued)
No. Display Name
Extended Name
Description
Values
Read-Write Data Type Parameter 30 [Access Level]

Allen-Bradley PowerFlex 755T Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 755T
Category	Adapter
Language	English