Name: Allen-Bradley PowerFlex
Brand: Allen-Bradley
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Start Inhibits 2-147

Start Inhibits The [Start Inhibits] parameter indicates the inverted state of all start

permissive conditions. If the bit is on (HI or 1), the corresponding

permissive requirement has not been met and the drive is inhibited from

starting. It will be updated continually, not only when a start attempt is

made. See also

Start Permissives on page 2-148.

Other manuals for Allen-Bradley PowerFlex

Questions and Answers:

Need help?

Do you have a question about the Allen-Bradley PowerFlex and is the answer not in the manual?

General

Category	DC Drives
Manufacturer	Allen-Bradley
Series	PowerFlex
Communication Options	EtherNet/IP, DeviceNet, ControlNet
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Enclosure Type	NEMA 1, NEMA 12, NEMA 4/4X
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m (3280 ft) without derating