Test Points 2-161
Test Points
Table 2.V Testpoint Codes and Functions
Thermal Regulator See Drive Overload on page 2-71.
UTILITY (File E)
Diagnostics
234
236
[Testpoint 1 Sel]
[Testpoint 2 Sel]
Selects the function whose value is
displayed value in [Testpoint x Data].
These are internal values that are not
accessible through parameters.
See Testpoint Codes and Functions on
page 4-10 for a listing of available codes
and functions.
Default:
Min/Max:
Display:
499
0/999
1
235
237
[Testpoint 1 Data]
[Testpoint 2 Data]
The present value of the function
selected in [Testpoint x Sel].
Default:
Min/Max:
Display:
Read Only
0/65535
1
Code Selected in
[Testpoint x Sel]
Function Whose Value is
Displayed in [Testpoint x Data]
0 DPI Error Status
1 Heatsink Temperature
2 Active Current Limit
3 Active PWM Frequency
4 Lifetime MegaWatt Hours
5 Lifetime Run Time
6 Lifetime Powered Up Time
7 Lifetime Power Cycles
8-99 Reserved for Factory Use
32
To Next Page
Loading...
