Rockwell Automation Publication 1783-UM001B-EN-P - May 2010 57
Appendix
E
Work with RSLogix 5000 Software, Version 13
or Earlier
What This Appendix
Contains
This appendix provides information about how to add the 1783-EMS switch to
the RSLogix 5000 software, version 13 or earlier.
Add Modules
Use the module with the Logix platform only. Use these steps to add it to your
RSLogix 5000 software, version 13 or earlier, by using the generic profile.
1. Right-click your Logix Ethernet card under the I/O configuration section
of your program and choose New Module.
2. From the list, choose Generic Ethernet Module.
To Next Page
Loading...
Need help?
General
