Programming Control
What Can Be Programmed?
This feature allows the owner to program cycle information,
standard vend pricing and other features by using the keypads.
This section offers a detailed description of all seven options
available for programming.
Each description includes instructions on when and why the op-
tion might be used and, more importantly, how to program the
option.
For more advanced users, a quick reference list of the options
available through the programming mode is located on this page.
NOTE: The letters and numbers in the Option column
of the Programmable Options List are what will be
shown in the Four-Digit Display when that option is se-
lected.
Programmable Options Available
Option Description
AtS
Vend Price
dEn1
Coin #1 Amount
dEn2
Coin #2 Amount
PLSE
Start Pulse Value
CyCL
Cycle Time
CnFg
Configuration Display
dCyC
Default Cycle
Vend Price AtS
This option allows the owner to set the vend price. The vend
price will be displayed in the Four-Digit Display.
Program this option whenever the vend price needs to be
changed.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the PERM PRESS/WARM (∧) or the DELICATES/
COLD (∨) keypad until PrOg appears in the Four-Digit Dis-
play.
Figure 5
3. Press the START (enter) keypad.
4. Press the PERM PRESS/WARM (∧) or the DELICATES/
COLD (∨) keypad to scroll through the programmable options
until AtS appears in the Four-Digit Display.
Figure 6
5.
When AtS appears in the Four-Digit Display, press the
START (enter) keypad. There are four digits in Vend Price
and the fourth digit will become the active digit. The active
digit will flash one second on and one second off.
Figure 7
NOTE: The vend price can be set from 0 to 9999.
6. Press the PERM PRESS/WARM (∧) or the DELICATES/
COLD (∨) keypad to increase or decrease the value of the ac-
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14 Part No. 202713ENR1
To Next Page
Loading...
