Alliance Laundry Systems BWNBC2PP112TW01 - Rapid Advance Feature; How to Use Rapid Advance; How to Enter Rapid Advance from Ready Mode; How to Enter Rapid Advance During an Active Cycle

Rapid Advance Feature
This feature allows the user to quickly advance through an active
cycle or advance into a cycle from the Ready Mode. This feature
is useful when tests must be performed immediately on a ma-
chine currently in an active cycle. In this case, the user can quick-
ly advance through the cycle to the Ready Mode. At this point,
the user can perform the required tests and then return the ma-
chine to the active cycle.
How to Enter Rapid Advance from
Ready Mode
1. If control is in Ready Mode, control must be put into Manual
Mode. Refer to How to Enter the Manual Mode.
2. Press the PERM PRESS/WARM (∧) or the DELICATES/
COLD (∨) keypad until rAPd appears in the display.
3. Press the START (enter) keypad. The Four-Digit Display will
show the cycle time remaining. The START LED will flash.
4. Press the START (enter) keypad to start cycle. The time re-
maining will show in the Four-Digit Display.
How to Enter Rapid Advance During an
Active Cycle
1. Be certain service door is open and coin vault is closed.
2. While pressing and holding the NORMAL/HOT keypad with
one hand, press the NORMAL/ WARM keypad with the other
hand. The Four- Digit Display will show rAPd.
How to Use Rapid Advance
While in the Rapid Advance feature, pressing the START (enter)
keypad will advance the washer to the next cycle step. The cycle
will advance through Wash, Rinse and Final Spin steps. The
Four-Digit Display will show the remaining cycle time at each
step.
Continue pressing the START (enter) keypad until the cycle is
completed.
How to Exit Rapid Advance Feature
Advance through the cycle until reaching the Ready Mode.
Rapid Advance Feature
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
26 Part No. 202713ENR1