Alliance Laundry Systems DTB50CG - Tumbler Overheating

70410501 29
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
17. Tumbler Overheating
Tumbler
overheating
Gas Models:
Does tumbler
have incorrect main
burner orifices?
No
Gas Models:
Is gas pressure
too high or low?
Is the
make-up air
inadequate?
Obtain and install
correct orifices.
Yes
Adjust gas pressure
as specified on
serial plate.
Yes
Refer to Installation
Manual
for make-up
air requirements.
Yes
Is there
lint buildup?
Yes
Clean lint
compartment. Check
damper for lint
accumulation. Check
ductwork for lint
buildup.
Is the
exhaust system
restricted or
inadequate?
Yes
Remove obstruction
or lint build up from
exhaust ductwork.
Refer to
Installation
Manual
for exhaust
system
requirements.
Replace
thermostat.
Yes
Is the
thermostat
inoperative?
No
TMB2146S
No
No
No