© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
1300003 (EN)
14
7. Slowly lower the finisher off the skid and onto
the first two rollers, exercising care to keep the
unit level. Refer to Figure 6.
IMPORTANT: DO NOT let go of the finisher at
any point in the moving process.
NOTE: If the distance between the skid and the
rollers is too far to move the finisher safely onto the
rollers, make another “step” by placing blocks of
wood between the skid and the rollers. The wood
should be level and shorter than the skid but taller
than the rollers. Gradually step the finisher down
onto the blocks of wood and then again onto the
rollers.
8. Slowly roll the finisher forward so that it comes
off the first roller, stays on the second roller, and
moves onto the third roller. Refer to Figure 7.
9. Level the finisher from right to left and front to
back. Verify right to left level by checking the
level of the heated roll, not the cabinet.
FWF12N
Figure 6
FWF12N
FWF7N
Figure 7
To Next Page
