Alliance Laundry Systems UD13F063 - Introduction; Serial Plate Location; Replacement Parts; Customer Service

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1300003 (EN)
4
Introduction
Serial Plate Location
The serial plate is located on the left side panel of the
finisher. Refer to Figure 1. Always provide the
machine’s serial number and model number when
ordering parts or when seeking technical assistance.
Replacement Parts
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.
Customer Service
For technical assistance, contact your distributor or
call the following number:
(920) 748-3121
Ripon, Wisconsin
Model Identification
Information in this manual is applicable to the models
listed below.
FWF12C
1 Serial Plate
Figure 1
FWF12C
1
UD13F063
UD13F078
UD13F079
UD13F126