Electronic Control Troubleshooting
WARNING
To reduce the risk of electric shock, fire, explosion,
serious injury or death:
• Disconnect electric power to the dryer before
servicing.
• Close gas shut-of valve to gas dryer before serv-
icing.
• Never start the Dryer with any guards/panels re-
moved.
• Whenever ground wires are removed during serv-
icing, these ground wires must be reconnected to
ensure that the dryer is properly grounded.
W001R1
Error Codes
Following is a list of possible error codes for an electronic con-
trol. Errors beginning with EI refer to external device Infra-red
communication errors. Errors beginning with EC refer to card
reader errors. All other errors refer to machine errors.
Display Description Cause/ Corrective Action
EI01
Transmission Failure Communication failure. Re-aim external
device and try again.
EI02
Device Time-out Communication failure. Re-aim external
device and try again.
EI03
Invalid Command Code Incorrect machine type. Before download-
ing, ensure data is for current machine
type.
EI04
Command Packet Time Out Communication failure. Re-aim external
device and try again.
EI05
Invalid or Out-of-Range Data Incorrect machine type. Before download-
ing, ensure data is for current machine
type and values entered are within the min-
imum and maximum limits.
EI09
CRC-16 Error Communication failure. Re-aim external
device and try again.
EI0A
Framing Error Communication error. Re-aim external de-
vice and try again.
EI0C
Time-out Exceeded Communication error. Re-aim external de-
vice and try again.
EI0E
Encryption Error Incorrect machine type. Before download-
ing, ensure data is for current machine
type.
EI0F
Invalid Wake-up or Infra-red Disabled Communication failure or infra-red is disa-
bled. Manually enable infra-red on control
or re-aim external device and try again.
Table 1 continues...
Electronic Control Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
34 Part No. D515519R3
To Next Page
Loading...
Need help?
General