Figure 38
7. Clean light sensors with a soft brush or air spray duster. Refer
to Figure 39 .
Pre-2018
2018 and Later
1. Light Sensors
Figure 39
8. Close cover for coin drop.
9. Reinstall coin drop into machine.
10. Reconnect electrical power to machine and drop.
11. Add a coin to drop to verify that coin drop is operating prop-
erly and that electrical connection is working properly.
Adjustments
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
71 Part No. D515519R3
To Previous Page
Loading...
Need help?
General