Chapter 3: Turn-Up and Troubleshooting
AT-iMG2400 Series Installation Guide 28
7. The iMG now has power and the correct loads, and can provide some level of service if it is provided in
the downloaded files.
Understanding the LEDs
Figure 14: LEDs
Ta b le 2 : L E D s
LED Meaning
PWR ON - The iMG is receiving power and the voltage is
within the acceptable range.
OFF - The unit is not receiving power.
SYST ON and Green - System is working normally
If LED is red, the status can be:
- ON – System is in Boot Phase
- Blinking (2Hz) Files are being written to FLASH
- Blinking (4Hz) Files are being downloaded
If light is orange, the status can be:
- Blinking – System at the Boot Loader Prompt
- ON – Need to release the reset button so the
default configuration will be loaded
To Next Page
Loading...