AT-iMG2400 Series Installation Guide 8
Preface
This guide contains instructions on how to install the AT-iMG2400 series models. Instructions for both
outdoor and indoor installation are included.
A unit is installed in the following enclosure:
Outdoor Enclosure, model number AT-EN-SFR-ONT
Safety Symbols Used in this Document
This document uses the following conventions:
Notes provide additional information.
Cautions inform you that performing or omitting a specific action may result in equipment damage or
loss of data.
Warnings inform you that performing or omitting a specific action may result in bodily injury.
Warnings inform you that an eye and skin hazard exists due to the presence of a Class 1/1M Laser
device.
Safety Precautions
Review the following safety precautions before you install the gateway.
The indicates that a translation of the safety statement is available in a PDF document titled
“Translated Safety Statements” (613-000405) on the Allied Telesis website at
http://www.alliedtelesis.com.
To Next Page
Loading...
Need help?
General
