Alltech KEENAN MechFiber340 - Table of Contents

PART I (Service & Maintenance)
1 Introduction 4
2 Warning Notes 5
3 Warning Signs 6
4 Operating Principles 7
4.1 Weighing 7
4.2 Chopping / Mixing 7
4.3 Feeding Out 8
4.4 Maintenance 8
4.5 Safety Precautions 9
5 Safety 9
6 Weighing System 12
7 Operation 13
7.1 Set-Up 13
7.2 Hitch Height Adjustment 15
7.3 Mixer Wagon Capacity 16
7.4 Loading & Mixing 17
7.5 Operating The KEENAN MechFiber Mixer Wagon 18
7.6 Operating The KEENAN MechFiber BaleBlend 19
7.7 Specic Instructions For BaleBlend Models 20
7.8 Washing and Chopping Root Crops 21
7.9 Feeding Out 21
8 Maintenance 22
8.1 Chains 22
8.2 Chain Tensioning 24
8.3 Greasing 25
8.4 Blade Maintenance 31
8.5 Maintenance for BaleBlend Models 31
8.6 Shear Bolts 32
8.7 Nuts & Bolts 33
8.8 Tyres 33
8.9 Wheels 34
8.10 Rear Feed-out Elevator (Where Fitted) 34
8.11 Side & Sub Feed-out Elevator (Where Fitted) 35
9 Maintenance Checklist 36
10 Specications 37
PART II (Spare Parts)
11 Parts List 38
11.1 Hydraulic system 38
11.2 Front cover parts 39
11.3 Driveline chains 41
11.4 Driveline parts 42
11.5 Rotor Parts 46
11.6 Auger Parts 47
11.7 Auger Chamber / Guillotine Door Parts 48
11.8 Standard Feed out Tray Parts 50
11.9 Fold Down Tray Options 52
11.10 Body Sealing Parts 56
11.11 Body Blade Parts 57
11.12 Rear Panel Parts 58
11.13 Chassis Parts 59
11.14 Baleblend Parts 61
11.15 Axles 66
11.16 Ancillary Parts 68
12 Troubleshooting 70
12.1 General Troubleshooting 70
12.2 Weighing Troubleshooting 72
13 Warranty 73
14 E.C. Declaration of Conformity / CE Certication 74
15 Contact Details 75
SECTION CONTENTS PAGE
3
Revision G04 July 2018