Alphasmart NEO2 SmartApplet - Resetting Goals to the Default

K EYW ORDS
Setting Speed and Accuracy Goals for KeyWords Students
5-15
. . . . .
4. To make the words per minute (WPM) goal higher, press the ↑ key. To
decrease it, press the
↓ key.
5. Press the space bar.
6. To increase the number of allowable errors, press the
↑ key. To decrease
it, press the
↓ key.
Resetting Goals to the Default
Follow these steps to change back to the default goals, which change as
students progress through the lessons. (See the table that starts on
page 5-14.)
1. In KeyWords, move the cursor next to Teacher options and press enter.
2. Type the master password and press enter.
3. Move the cursor down next to Reset WPM and error goals to default
and press enter.
4. A message will tell you that the goals have been reset. Press the space
bar.
Use the arrow keys to change the
words per minute:8
(Press [SPACE BAR] to continue.)
Use the arrow keys to change the
Allowable errors:12
(Press [SPACE BAR] to continue.)
You can also reset
KeyWords goals in
AlphaSmart
Manager. With NEO
connected, click the Settings
tab in AlphaSmart Manager
and click Keywords on the
left. Then, choose Yes after
Reset WPM/error goals to
default.