128
En
Changing the settings
Launching Utilities mode
Be sure to close your DJ application and then launch Utilities mode.
To use Utilities mode when connected to rekordbox for iOS/Android or
rekordbox for Mac/Windows, set it on the preferences screen in
rekordbox for iOS/Android or rekordbox for Mac/Windows.
Read: Changing the settings in rekordbox for iOS/Android (page 55)
Read: Changing the settings in rekordbox for Mac/Windows
(page 95)
1 Disconnect the USB cable.
2 Hold both the [SHIFT] and [" (play/pause)] buttons on the left
deck and connect the USB cable.
Utilities mode launches.
3 Change the settings.
When you change the settings, they will be saved. While saving, the [SMART
FADER] button flashes. If you disconnect the USB cable while the button is
flashing, settings may not be saved.
4 Disconnect the USB cable to turn off the unit.
Utilities mode turns off.
To Next Page
Loading...
