26
En
Connections
• Be sure to disconnect the USB cable before connecting different
devices or changing connections.
Refer to the instruction manuals for devices to be connected.
• For connection to PC/Mac or a mobile device, be sure to use the USB
cable specified below.
– To connect to a device with a USB Type-C port: use the USB cable
supplied with the unit
– To connect to a device with a USB Type-A port: use a USB cable
certified to the appropriate standard with a length of 3 m or less
• When using a USB hub, be sure it's a product recommended by the
manufacturer of your PC/Mac. We don’t guarantee the operation of
all USB hubs.
• When connecting to a PC/Mac, you can use the unit with a single
connection to your computer (USB bus power). This unit can’t be
used with USB bus power in the following situations:
– The power supply capacity of the USB port on your PC/Mac is too
low.
– Your PC/Mac is connected with other USB devices.
– The impedance of the connected headphones is lower than 32 Ω.
– A mono-jack plug is connected to the [ (headphones)] output
terminal.
• The following devices can be connected to the unit with a USB cable.
– iPhone or iPad with a USB Type-C port.
– Android device with a USB Type-C port.
* Depending on the device, the connection may not be succeed, the
sound may not output correctly, or some noise may occur. In this
case, connect it via Bluetooth.
• When using the unit with a mobile device via Bluetooth, you can
connect a USB power adapter or mobile battery to power the unit.
To Next Page
Loading...
