Need help?Do you have a question about the AlphaTheta euphonia and is the answer not in the manual?
Introduction to the 4-channel mixer's capabilities and sound quality.
Guidance on understanding manual conventions like bracketed terms and general notes.
Lists the items included with the product, including cables and documentation.
Refers users to online resources for rekordbox setup and usage instructions.
Identifies and describes the controls and indicators on the mixer's top surface.
Details the various input and output terminals located on the rear of the mixer.
Provides instructions and notes for installing the dedicated software on a PC or Mac.
Guides users on how to download the necessary software from the website.
Details the steps for installing the downloaded software, including license agreement.
Explains the purpose and launching procedures for the Setting Utility software.
Describes how to check input settings via the Setting Utility's mixer input tab.
Details configuring the mixer's audio output to a PC/Mac using the Setting Utility.
Explains how to adjust buffer size in ASIO settings for optimal audio performance.
Guides users on how to check software and firmware versions via the 'About' tab.
Details the options available in the mixer audio output pull-down menu.
Illustrates how to connect various input devices to the mixer's rear panel terminals.
Shows how to connect output devices like amplifiers and monitors to the mixer.
Explains how to connect headphones to the top panel terminals.
Details how to connect external effects units using the SEND FX send/return terminals.
Explains how to connect external effects units using the Master Insert send/return terminals.
Introduces the channel and master sections, detailing controls like input selectors and EQs.
Provides steps for adjusting input volume, output volume, and master sound volume.
Explains how to adjust the volume of each frequency band using EQ knobs.
Details how to adjust the stereo balance for various output terminals.
Describes the controls for the Master Isolator, including boost level and frequency band adjustments.
Provides steps for setting boost level and adjusting frequency band volumes.
Details headphone monitoring controls like mono/stereo selection and level adjustment.
Step-by-step guide on how to connect and use headphones for monitoring.
Explains booth EQ and level controls, and instructions for connecting a booth monitor.
Details microphone input controls: status indicator, selector switch, and EQ.
Step-by-step guide for connecting and using a microphone with the mixer.
Introduces SEND FX section: selector switches, TAP button, and knobs.
Explains how to apply the HPF effect to channel sounds using the SEND FX selector.
Illustrates how to route built-in or external effects to the master output.
Describes how to manually set the BPM using the TAP button.
Lists and describes parameters for built-in SEND FX like HPF, Delay, and Tape Echo.
Explains how to use external effects units with the SEND FX function.
Details how to connect and activate external effects units via the Master Insert function.
Introduces the USB/MIDI port and its function for controlling DJ software.
Guides on connecting the PC/Mac and launching MIDI software for control.
Explains the UTILITY screen interface, including firmware version and setting items.
Provides steps on how to navigate and modify settings within the UTILITY screen.
Lists and describes available settings such as BALANCE, MASTER ATT., and REC OUT SOURCE.
Explains the power management feature, automatic off mode, and how to exit it.
Details the procedure for resetting the unit to its original factory default settings.
Lists general specifications like power requirements, weight, and dimensions.
Provides detailed audio specifications including sampling rate, converters, and frequency characteristics.
Lists the types and quantities of input and output terminals available on the unit.
Presents a visual representation of the unit's internal signal flow and component connections.
Offers solutions for common issues like power, audio output, and distorted sound.
Addresses issues with SEND FX, Master Insert, and tempo measurement problems.
Troubleshoots issues related to PC/Mac connections and turntable audio distortion.
Explains normal phenomena on the LCD display and how to improve visibility.
Provides instructions on how to clean the unit safely.
Lists trademarks and registered trademarks related to the product and software.
Presents the open source software licenses used in the product.
Details the BSD-3-Clause License terms and conditions.
Explains the dual licensing of the libc++ library.
Information about the LLVM Team and their role in developing the software.
Advises on copyright laws concerning personal recordings and downloaded music.
General| Sampling Rate | 96 kHz |
|---|---|
| A/D Converter | 32-bit |
| D/A Converter | 32-bit |
| Frequency Response | 20 Hz - 40 kHz |
| Channels | 2 |
| EQ | 3-band |
| Inputs | XLR, RCA, USB |
| Outputs | XLR, RCA, USB |
| Width | 320 mm |
| Depth | 320 mm |
To Next Page