AlphaTheta euphonia - SEND FX Types and Settings

42
SEND FX
SEND FX types and settings
You can adjust the following settings with the knobs.
• The selected effect is displayed on the screen.
• Built-in effects and external effects can’t be selected at the same time.
Effect/operation Description
Built-in effects
HPF

Applies High-Pass Filter to the channel sound.
•SEND:
Cut-off frequency for filter
• PARAMETER:
Resonance
DELAY Adds clear delay sound.
•SEND:
SEND level
•TIME

: Delay time with respect to 1 beat of the BPM (beat fraction):
1/16 to 1 beat
• PARAMETER:
Feedback
TAPE ECHO Adds delay sound with fluctuation and saturation.
•SEND:
SEND level
•TIME

: Delay time with respect to 1 beat of the BPM (beat fraction):
1/16 to 1 beat
• PARAMETER:
Feedback