37
Microphone
Using a microphone
1 Connect a microphone to the [MIC] terminal.
Read more: Connecting to the input terminals (page 21)
2 Slide the [OFF, ON, TALKOVER] selector switch to set the
microphone sound output.
3 Turn the [MIC LEVEL] knob to adjust the microphone volume
level.
• Note that turning the knob too far clockwise outputs the sound at a high volume.
4 Turn the [EQ (HI, LOW)] knobs to adjust the volume of each
frequency band.
5 Speak into the microphone.
To Next Page
Loading...