29
Audio output
Adjusting the sound of the channels
1 Turn the [EQ (HI, MID, LOW)] knobs to adjust the volume of
each frequency band.
Adjusting the left/right sound balance
You can adjust the left/right balance for sounds output from the following terminals.
– [MASTER]
– [REC OUT]
– [BOOTH]
– [USB]
– PHONES
• You can adjust the left/right balance for sound output from the USB port only when
[MIX(REC OUT with MIC)] or [MIX(REC OUT without MIC)] is selected for [Mixer Audio
Output] in the Settings Utility (page 17).
1 Press and hold the [VIEW/UTILITY] button.
The [UTILITY] screen appears.
Read more:
Settings (page 46).
2
Select [BALANCE] and press the [MASTER INSERT/(WAKE UP)]
button.
The [BALANCE] screen appears.
3
Press the [VIEW/UTILITY] or [BRIGHTNESS] button to adjust the
left/right balance.
• Only the left channel sound of stereo audio is output when set to the [L] (leftmost)
position, and only the right channel sound is output when set to the [R] (rightmost)
position.
To Next Page
Loading...