39
SEND FX
8. SEND (LOW, MID, HI) buttons
Select the frequency band ([LOW], [MID], [HI]) of the master sound to apply SEND FX to.
The selected button lights up.
• The buttons don’t light up when [HPF] is selected with the SEND FX selector switch.
• Press the lit [SEND] button to turn SEND off.
9.
SEND (LOW, MID, HI) indicators
Lights up when the frequency band ([LOW], [MID], [HI]) of the master sound is sent.
• The frequency bands of the master sound are sent only when all the following
conditions are met.
— The [SEND] button is lit.
— The corresponding [LOW], [MID], [HI] knobs for Master Isolator are set to the right
of the center position.
Connection when using an external effects unit: Connecting external effects units
(page 24)
Applying High-Pass Filter (HPF) to the channel
sound
HPF is applied to each channel when [HPF] is selected with the SEND FX selector switch.
Read more: SEND FX types and settings (page 42)
1 Turn the SEND FX selector switch to select [HPF].
2 Turn a [SEND] knob to adjust the cut-off frequency.
• Turning all the way counterclockwise outputs the original sound.
3 Turn the [PARAMETER] knob to adjust the resonance.
• The following buttons and knobs are disabled when [HPF] is selected with the SEND FX
selector switch.
– [SEND (LOW, MID, HI)] buttons
– TIME knob
– [RETURN LEVEL] knob
To Next Page
Loading...