AlphaTheta euphonia - Detailed Utility Settings

48
Settings
Utility settings
*: Factory setting
Setting item Description
BALANCE
Sets the output balance.
• Setting values: L128 to 0* to R127
MASTER ATT.
Sets the attenuation level for the master sound output from
the [MASTER] and [REC OUT] terminals.
• Setting values: -12dB, -9dB, -6dB, -3dB, 0dB
*
MASTER MONO/STEREO
Sets the output method (mono/stereo) for the master sound
output from the [MASTER] and [REC OUT] terminals.
• Setting values: MONO, STEREO
*
REC OUT SOURCE
Sets the sound output from the [REC OUT] terminals.
• Setting values: REC w/ MIC
*
, REC w/o MIC, MASTER
• [REC w/ MIC] outputs the master sound and microphone
sound which haven’t been adjusted with the [MASTER
LEVEL] knob.
• [REC w/o MIC] outputs the master sound before it’s
affected by the [MASTER LEVEL] knob.
• [MASTER] outputs the same sound output from the
[MASTER] terminals.
BOOTH ATT.
Sets the attenuation level for the sound output from the
[BOOTH] terminals.
• Setting values: -12dB, -9dB, -6dB, -3dB, 0dB
*
BOOTH MONO/STEREO
Sets the output method (mono/stereo) for the sound output
from the [BOOTH] terminals.
• Setting values: MONO, STEREO
*