28
Audio output
Outputting sound
Adjusting the channel input volume
1 Turn the input selector switch to select an input sound
source.
2 Turn the [TRIM] knob to adjust the volume for the input sound.
The channel level indicator lights up when sound is input to the channel.
Adjusting the channel output volume
1 Turn the channel rotary fader to adjust the volume for the
output sound.
Adjusting the master sound volume
1 Turn the [MASTER LEVEL] knob to adjust the volume for the
master sound.
The peak level display changes when the master sound is output.
Read more:
Master Isolator (page 31).
To Next Page
Loading...