27
Audio output
— [PHONO]: Selects a turntable connected to the [PHONO] terminals.
2.
EQ (HI, MID, LOW) knobs
Adjusts the volume of each frequency band.
Each knob adjusts in the following range.
—[HI]: -26 dB to +6 dB
—[MID]: -26 dB to +6 dB
—[LOW]: -26 dB to +6 dB
3.
TRIM knob
Adjusts the volume for the channel input sound.
4.
SEND knob (page 38)
5.
CUE button (page 34)
6.
Channel level indicator
Displays the volume level before the sound passes through the channel rotary fader.
7.
Channel rotary fader
Adjusts the volume for the channel output sound. Turing it clockwise increases the
volume, and counterclockwise decreases the volume.
Master section
8. Screen (page 10)
Displays the volume of the master sound on the right side of the screen.
9.
MASTER LEVEL knob
Adjusts the volume for the master sound.
To Next Page
Loading...