49
Settings
Power Management
When [POWER MANAGEMENT] is set to [ON], the unit automatically enters Off mode after
20 minutes of inactivity if no audio signal is input to the unit. The [MASTER INSERT/(WAKE
UP)] button lights up in Off mode.
Press the [
MASTER INSERT/(WAKE UP)
] button to exit Off mode.
• The factory setting is [ON].
• Set [POWER MANAGEMENT] to [OFF] if you don’t need to use the Power Management
function.
• Power consumption may increase when [POWER MANAGEMENT] is set to [OFF].
BOOTH MUTE WHEN MIC
ON
Sets whether to mute the sound output from the [BOOTH]
terminals when the microphone is turned on.
• Setting values: OFF
*
, ON
MIC TO BOOTH ATT.
Sets the volume for the microphone sound that’s input to the
sound output from the [BOOTH] terminals.
• Setting values: -∞, -18dB, -15dB, -12dB, -9dB, -6dB,
-3dB, 0dB
*
POWER MANAGEMENT
Sets the Power Management function (page 49).
• Setting values: OFF, ON
*
Setting item Description
To Next Page
Loading...