57
Additional information
Effects
SEND FX doesn’t work.
• Check if the [SEND] knob is set properly.
• Make sure any external effects unit is connected to the [SEND FX EXTERNAL SEND] and
[SEND FX EXTERNAL RETURN] terminals properly.
• Make sure the SEND FX selector switch isn’t set to [HPF] before using the [SEND] button.
SEND FX isn’t input to the master sound.
• Check if the [RETURN LEVEL] knob is set properly.
There’s no clicking feeling when using the TIME knob.
• You won’t get a clicking feeling if the SEND FX selector switch isn’t set to [DELAY], [TAPE
ECHO], or [ECHO VERB].
Master Insert doesn’t work.
• Make sure any external effects unit is connected to the [MASTER INSERT SEND] and
[
MASTER INSERT RETURN] terminals properly.
• Make sure the volume for the external effects unit is set properly.
• Check if the [MASTER INSERT/(WAKE UP)] button blinks.
Sound from an external effects unit is distorted.
• Make sure the volume for the external effects unit is set properly.
The tempo (BPM) of a track can’t be measured or the
measured tempo is wrong.
• Adjust the [TRIM] knob so [+12] dB of the channel level indicator doesn’t light up.
• To measure the BPM automatically, make sure sound is being output from the master.
• Tempo (BPM) can’t be measured for some tracks. Use the [TAP] button to manually set the
tempo for those tracks.
The measured tempo (BPM) differs from the value shown in
the track’s information.
• The values don’t match when BPM measuring methods are different.
To Next Page
Loading...