AlphaTheta DDJ-FLX2 - Page 130

Changing the settings
130
En
 Android MONO/STEREO
Set the sound output method when connecting to the Android device.
When you select the stereo output, sound may not output normally. In
this case, select the mono output.
Press Performance Pad 8 on the left deck.
• Pad 8 is lit: Outputs in mono.
• Pad 8 is unlit: Outputs in stereo.
 Demo mode
In normal conditions, if you don’t use any features for a specified
amount of time, the unit will enter Demo mode.
• When any knob or button on the unit is used during Demo mode,
Demo mode is canceled.
Press one of the Performance Pads 1 through 4 on the left deck.
• Pad 1 is lit: Demo mode is switched off.
• Pad 2 is lit: Demo mode starts when you don’t use the unit for 1
minute.
• Pad 3 is lit: Demo mode starts when you don’t use the unit for 5
minutes.
• Pad 4 is lit: Demo mode starts when you don’t use the unit for 10
minutes. (Default)