AlphaTheta DDJ-FLX2 - Page 96

rekordbox for Mac/Windows
96
En
When [Use the recommended SMART FADER curve] is set, the
curve changes to the recommendation for Smart Fader.
When [Use the recommended SMART FADER curve] isn’t set, the
curve changes according to the setting of [CROSSFADER Curve] or
[Channel Fader Curve] in [Preferences] > [Controller] > [Mixer].
[Controller] > [Effect]:
[SMART CFX] setting
Change the position of the SMART CFX preset window from [Top
Left], [Top Right], [Center], [Bottom Left], and [Bottom Right].
The default setting is [Center].
[Controller] > [DDJ-FLX2]:
[Demo mode] setting:
Set the time to pass before Demo mode starts.
The default setting is [10 minutes].
To cancel Demo mode, operate any knob or button on the unit.
•[1 minute]: Demo mode starts when there is no operation on the unit
for 1 minute.
• [5 minutes]: Demo mode starts when there is no operation on the
unit for 5 minutes.
• [10 minutes]: Demo mode starts when there is no operation on the
unit for 10 minutes.
• [Off]: Demo mode never starts.