PreseUing
Stations
Manually
1 Select the radio band and tune in a desired radio
station you wish to store
in
the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
preset
buttons
(1
through
6)
into which you wish
to store the station.
The selected station is stored.
The
display
shows the band, preset
number
and station
frequency
memorized.
• A total
of
18 stations can be stored in the preset memory (6 stations
for
each band; FM
I,
FM2 and AM).
•
If
you store a station in a preset memory which already has a station,
the current station will be cleared
and
replaced with the new station.
Presetting
Stations
Automatically
1 Press
BAND
repeatedly until the desired radio band
is displayed.
2 Press and hold
TUNE/A.ME
for at least 2 seconds.
The
frequency
on the display continues to
change
while the
automatic memory
is
in progress. The tuner will
automatically seek and store 6 strong stations
in
the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic
memory
has been
completed,
the tuner
goes
to the station stored in preset location
NO.1.
•
If
no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning
to
Preset
Stations
Frequency
Search
Function
You
can search for a radio station
by
its frequency.
1 Press and hold
~
lENT
for at least 2 seconds
in
Radio mode to activate Frequency search mode.
2 Turn the
Rotary
encoder
to select the desired
frequency.
3
*
Press
~
lENT
to receive the selected frequency.
* Operation is
110t
required during HD Radio reception.
• Press
=:J/ESC
in the search mode to cancel. Or. the search mode
will be canceled
if
110
operation is
performedfor
10
seconds.
Receiving
a
Multicast
Station
(HD
Radio™
Reception)
(HD
Radio
mode
only)
Multicasting is the Ability to broadcast multiple program streams over a
single
FM
frequency. This increases the amount and diversity
of
content
choices. A maximum
of
eight multicast station channels can be selected
on this unit.
When multicast station is received, the program number
and the SPS indicator lights up. Press
...
or
~
to select
the desired program service.
Receiving the Multicast Station Program Service.
BAND No.
nr-
,-,..-_-_-_-
M_UI_ti_C_8_St_N_O_._
SPS indicator
F1-3
c!lb
90.3MHz
1 Press
BAND
repeatedly until the desired band is
displayed.
2 Press
anyone
of the station
preset
buttons
(1
through
6)
that has your desired radio station in
memory.
The display shows the band, preset
number
and
frequency
of the station selected.
8-EN
Program Service example:
Multicast Radio Station Program
No.
90.3 MHz
NO.1
90.3 MHz
NO.2
90.3 MHz
NO.3
I
I
I
I
90.3 MHz
NO.8
Program Service
MPS:
Main Program Service
SPS:
Sub-program Service
SPS:
Sub-program Service
SPS:
SUb-program Service
To Next Page
Loading...
