Playback
1 Press SOURCE/<!) to switch to the USB iPod mode.
TUNER
4
XM
RADIO/SIRIUS·
I
4
DISC
~
USB
AUDIO·
2
/
USB
iPod']
4
BT
AUDIO·
4
/AUX+·
5
~
CHANGER·
6
~
TUNER
.1
Only when XM Radio
or
SIRIUS Radio is connected.
•2 Disp/ayed only when no iPhoneliPod is connecled.
.3
Displayed only when
Ihe
iPhoneliPod is connected.
04
Displayed only when BLUETOOTH IN is set to ADA PTE. refer 10
"Setlinl:
Ihe
B/uetooth Connection" (pal:e 17).
.5
Displayed only when the AUX+ SETUP is set to ON. refer to "Set/inl:
the AUX+ SETUP Mode" (pal:e 18).
• 6 Only when the CD chanl:er is connected.
2 Press
~
or
~
to select the desired song.
Return to the beginning
of
the current song:
Press
~.
Fast backward through current song:
Press
and hold ,
.......
Advance to the beginning
of
the next song:
Press
~~.
Fast forward through current song:
Press
and hold
~.
3
To
pause playback, press
~/II.
Pressing
~/II
again will resume playback.
• A SO/lEI
playinEi
on the iPhoneliPod while it is connected
to
this unit
will continue to play
fmm
where it was paused after disconnection.
•
If
you listen to an episode from a selected podcast or audiobook. the
episode con be changed by
pressing'"
or
~
.
• An episode
may
have several chapters. The chapter can be changed
by
pressinEi
~
or
~.
Searching
for
a
desired
Song
An iPhone/iPod can contain hundreds
of
songs. By using file tag
information and keeping these songs organized
in
playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the
PLA
YLiSTI
ARTISTIALBUM/SONGIPODCAST/GENREI
COMPOSERIAUDIOBOOK search mode to narrow searches based on
the table below.
Hierarchy 1
Hierarchy 2 Hierarchy 3 Hierarchy 4
PLAYLIST
SONG
- -
ARTlST*
ALBUM-
SONG
-
ALBUM-
SONG
-
-
SONG
- - -
POD
CAST
EPISODE
-
-
GENRE-
ARTIST-
ALBUM-
SONG
COMPOSER-
ALBUM-
SONG
-
AUDIOBOOK
-
- -
For example: Searching by Artist name
The
following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
24-EN
1 Press
0..
lENT to activate the search selection
mode.
2 Turn the
Rotary
encoder
to select the Artist search
mode, and then press
0..
lENT.
PLAYLIST H ARTIST H ALBUM H SONG H
PODCAST H GENRE H COMPOSER H AUDIOBOOK
H PLAYLIST
3 Turn the
Rotary
encoder
to select the desired
Artist, and then press
0..
lENT.
4 Turn the
Rotary
encoder
to select an album, and
then press
0..
lENT.
5 Turn the
Rotary
encoder
to select a song and
press
0..
lENT.
The selected
song
is
played
back.
• After pressing and holding
0..
lENT
for
at least 2 seconds while in
each hierarchy (except SONG
and
AUDIOBOOK hierarchy). all
songs
of
the selected hierarchy are played back.
• After selecting [ALL] in the search mode with ...... press and hold
0..
lENT
for
at least 2 seconds to play back all
sonEis
in
the iPhonel
iPod
or
selected search mode.
• While in the search mode.
ifyou press and hold
~
IESC
for
at
least
2 seconds.
or
no operation is
perfonnedfor
30
seconds, the search
mode is canceled.
•
In
the search mode. pressing
~/ESC
will return to the previous
mode.
• When search is made during M.I.X. play. the M.I.X. play mode will be
canceled.
• "NO
SONG"
will be displayed ifthere is no song in the selected
playlist
in
the PLAYLIST search mode.
•
"NO
PODCAST" will be displayed ifthere is no podcast data in the
iPhoneliPod
in
the PODCASTsearch mode.
• "NO AUDIOBOOK" will be displayed
if
there is no audiobook data
in the iPhoneliPod
in
the AUDIOBOOK search mode.
•
If
"iPod name" stored in the iPhoneliPod is selected
in
the desired
playlist search mode
and
0..
lENT
is pressed. you can search
for
all
sonEis
in
the iPhoneliPod. Also,
if
you press
and
hold
0..
lENT
for
at
least
2 seconds, all
sonEis
in
the iPhoneliPod are played back.
• Depending on the iPhoneliPod. podcast search is not supported.
•
If
Alphabet Skip Function is activated
in
the search mode. a search
can be made quickly by Alphabet skip function to find the desired
artist
or
song. etc.
For
details. refer to "Alphabet Skip Function" on
page
25.
•
If
anyone
of
the preset buttons
(l
through
6)
is pressed
in
the search
mode.
a search can be made quickly
by
skipping to the specified
location.
For
details. refer to "Direct Search Function" on page 25.
•
!fno
operation is
performedfor
30 seconds during search mode. the
unit will return to normal mode.
To Next Page
Loading...
