Instant
Replay
Function
(SIRIUS
only)
In
SIRIUS mode, the current channel is saved using the Instant Replay
memory function. Use this function to pause the channel content at any
time. When playback is continued.
it
will begin at the position it was
paused. This function can be used to store up to
44
minutes
of
audio.
1 During SIRIUS reception, press
~/II
to select the
Instant Replay mode.
"REPLAY
MODE"
is
displayed, and the received station
is
stored.
2 Press
~/II
again to activate the play mode.
The stored contents are played back.
During
REPLAY
playback:
Fast
rewind:
Press
and hold
I~.
Fast
forward:
Press
and hold
~.
Returning
to
the
beginning of
the
current
song:
Press
I~.
Advancing
to
the
beginning
of
the
next
song:
Press
~~.
•
If
you continue to press Fastforward
antilthe
end. the INSTANT
REPUl.Y mode is canceled. and the unit will change to usual
reception.
3 Press
~/ESC
for at least 2 seconds to cancel the
INSTANT REPLAY mode.
The unit returns to usual SIRIUS broadcasting mode.
Time display example during
REPLAY
playback (Instant
Replay Mode only)
Changing
the
Display
Text information. such as the channel name, artist name/feature and
song/program title.
is
available with each XM
or
Sirius channel. The
unit can display this text information as explained below.
In
XM or SIRIUS mode, press
VIEW.
Each time you press this button, the display changes as shown
below.
CHANNEL No./(REMAINING TIME)*'
~
CATEGORY NAME
--7
CHANNEL NAME --7 ARTIST NAME
~
SONG TITLE
~
COMPOSER NAME,2
...
_~
AUXILIARY
DATA
FIELD']')
CLOCK
--7
CHANNEL No./(REMAINING TIME)
,I
Displayed only during instant replay.
,2
SIRIUS mode only.
*3
XM mode only:
When
ADF
is
tumed
OFF. this information is not displayed (see
"Selling the Auxiliary Data Field Display (XM only)" on page 22).
• When the "Scroll Selling (TEXT SCROLL)" (page 17) is set
to
"SCROLL AUTO
",
the display scrolls continuously. When the Scroll
Selling is set to "SCROLL MANU". the display scrolls only once
after any function is peiforrned (PRESET, BAND. SEARCH. etc.).
"CHANNEL No."
and
"CLOCK" displays do I/ot scroll.
• Depending
01/
the
1II0del.
the display may differfrom the one shown
above.
Setting
the
Auxiliary
Data
Field
Display
(XM
only)
Play
Time
(Remaining time for
INSTANT REPLAY)
C H
184
-
43'59
T
81-3
1.11.
The
XM Auxiliary Data Field (ADF) display can be switched
on
or
off.
There is no ADF function for the SIRIUS receiver.
1 Press and hold
F/SETUP
for at least 2 seconds to
select the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the XM ADF
mode, and then press
o..IENT.
3 Turn the
Rotary
encoder
to select
XM
ADF ONI
OFF, and then press
o../ENT.
When setting
to
ON, Auxiliary Data Field
is
displayed by
pressing VIEW (Refer
to
the "Changing the Display" section
on
page 22.).
4 Press and hold
F/SETUP
for at least 2 seconds to
return to normal mode.
• Pressing
~/ESC
returns
to
the previous SETUP
1II0de
.
•
Ifno
operation is peiforrnedfor 60 seconds. SETUP is canceled.
22-EN
To Next Page
Loading...
