Playing
MP3
Files
with
the
CD
Changer
(Optional)
SOURCEI<!>
BAND
~tll
FtSETUP
Select buttons
(1
through 6)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1 Press SOURCE/<!>
to
switch
to
the
MP3 Changer
mode.
2 Press
anyone
of
the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded
in
the
CD Changer.
3 To pause playback, press
~
III
•
Pressing
~
III
again will resume playback.
Controlling
CD
Changer
(Optional)
An optional6-disc or l2-disc CD Changer may be connected to this unit
if
it
is
Ai-NET compatible. With a CD Changer connected
to
the
Ai-NET input
of
this unit, the CD Changer will be controllable from
this unit.
Using the
KCA-400c
(Multi-Changer Switching device) or the
KCA-4IOC (Versatile Link Terminal) multiple changers can be
controlled
by
this unit.
See "Multi-Changer Selection (Optional)" on page 35 for selecting the
CD Changers.
• The call/rots
on
this unit
for
CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllablefrom this unit
as
well as
the CD changer.
1 Press SOURCE/<!>
to
activate
the
CHANGER mode.
• The source indicator varies depending on the connected source.
• Press
BAND
to switch the Disc mode in the Changer mode.
2 Press
F/SETUP
to
activate Disc Select mode.
Disc Select Mode Disc Select
Mode"
-7 -7
(Disc
No.I-6)
(Disc
No
7--12)
Disc Select Mode
RPT/tIl1.l.X.
Mode
-7
(Disc
~Jo
1-6)
3 Press the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded in the CD
Changer.
The selected disc number appears
in
the display and
CD/MP3 playback starts.
• After selecting the desired disc. you can operate in the same way as
for
the CD player
of
this unit. For details. see the
CDIMP3IWMN
AAC
section.
* When a 12-disc CD changer is connected.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer. refer to
"CDIMP3IWMNAAC" page
9 to
12.
Multi-Changer
Selection
(Optional)
Alpine's Ai-NET system will support up to 6
CD
Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must
be used. If you use I Switching device, you can
connect up to 4
CD
Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-41
OC
(Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1 Press SOURCE/<!>
on
this
unit
to
activate the CD
Changer mode.
Alternatively, press SOURCE
on
the remote control
(RUE-4202) to activate the CD Changer mode.
SOURCE
--+-+--,
2 Press
BAND
on
this
unit
or
the RUE-4202
to
activate
the
CD
Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3 Press
BAND
until
the desired CD Changer
indicator
appears
on
the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears
on
the display.
•
If
the selected CD Changer
is
not connected. the display will show
"NO
CHANGER-(No.)".
•
To
operate the selected changer. see "CDIMP3IWMNAAC" (pages 9
to
12).
• For further details about the extemal input (AUX) when using
KCA-410C. see "Setting the AUX Mode (V-Link)"
on
page
18.
35-EN
To Next Page
Loading...
