Remove the iPhoneliPod
Remove the iPhone/iPod from Interface cable for iPod
(KCU-440i, sold separately).
• After changing the unit to a source other than the iPhone/iPod,
remove the iPhone/iPod.
If
the iPhone/iPod is removed in the iPod
mode, data may cause damage.
• Jfsoulld is
1I0t
output
or
the iPholleliPod is not recognised evell whell
the iPhoneliPod is cOllnected. remove the iPhone/iPod once, then
connect it again,
or
reset the iPod.
• Do not leave the iPhoneliPod in a vehicle for a long time. Heat and
humidity may damage the iPhoneliPod
and
you may not be able
to
play it again.
USB memory
('~(,;;,\
(sold separately)
);~.!
mcS
.
~):;
....
" ...' .
.
f::]j'Ll1.jol~_
Cable (sold separately)
This unit
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
Lock case
(Included with cable)
USB connector
This unit
Remove USB memory
Pull out USB memory squarely from the USB cable.
USB
memory
(sold separately)
,~I
~
•..
"_
"~~
Cable (sold separately)
• When removing USB memory, pull
it
out straight.
•
~f
sound is not output
or
USB memory is
1I0t
recogllized evell when
USB memory is connected, remove USB memory once. then connect
it
again
• Change to a source other than the USB memory mode. then remove
the USB memory.
~fthe
USB memory is removed ill the USB memory
mode. data may be damaged.
• Route the USB cable awayfrom another cables. etc.
42-EN
To Next Page
Loading...
