Alpine CDA-7878 - Defeat; Switching the Tuner Mode

12-EN
Basic Operation
f UP
g DN
DEFEAT
DISP/B.OUT
Defeat
Use the DEFEAT button to return the previously
adjusted settings of DHE, EQ, and CSD
(Customized Sound Database) to the factory
default settings.
1 Press and hold the DEFEAT button for at least 2
seconds to turn Defeat on.
To cancel Defeat, press and hold the DEFEAT
button again for at least 2 seconds.
Switching the Tuner Mode
The CDA-7878 incorporates the MAX TUNE SQ
for the highest quality tuner audio. Moreover, you
can choose between 3 settings to suit your own
personal sound preferences and usage.
1 Press and hold the SETUP button for at least 2
seconds.
2 Press the f UP button repeatedly to select
"TUNER."
Each press of the f UP button changes the
modes as shown:
∗ Displayed when you set SUB-W to ON.
NOTE
If you press the g DN button, the display scrolls in
reverse sequence.
3 Press the TUNE button to switch the TUNER
mode.
•
TUNER NORMAL : Standard setting
•
TUNER HI-FI : Sound quality priority setting
• TUNER STABLE : Noiseless priority setting
NOTES
• The initial setting at the factory is "NORMAL."
This is the best compromise between sound quality and
noise immunity.
• If you switch the tuner to HI-FI mode and find the
station is too noisy, we recommend you change back to
the NORMAL mode.
4 When the setting is completed, press the SETUP
button to return to the normal mode.
SETUP
TUNE
TUNER SUB-W SUB-W (switching phase)
∗
SUB-W STEREO/MONO
∗
AUX MUTE SCROLL BEEP
CONTRAST
DISC/FOLDER
DEMO
SRC DHE
→ TUNER HI-FI → TUNER NORMAL → TUNER STABLE