Alpine CDA-7878 - M.I.X. (Random Play); Random Play); Scanning Programs

To Next Page

To Previous Page

20-EN

CD Player Operation

SOURCE

Select buttons (1 through 6)BAND

M.I.X. (Random Play)

1 Press the M.I.X. button in the play or pause mode.

The tracks on the disc will be played back in a

random sequence. After all the tracks on the disc

have been played back once, the player will

begin a new random sequence play until the

M.I.X. mode is cancelled.

To cancel M.I.X. play, press the M.I.X. button

again to turn off the M.I.X.

NOTES

• If a CD Changer equipped with the ALL M.I.X. function

is connected, ALL M.I.X. will also be selectable.

In this mode, the tracks on all the CDs in the current

magazine will be included in the random playback

sequence.

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

the

indicator and go to step 1 within 5

seconds.

• In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to

illuminate the

indicator and go to step 1

within 5 seconds.

→ M.I.X. → ALL -M.I.X. → (off)

Scanning Programs

1 Press the SCAN button to activate the Scan

mode.

The first 10 seconds of each track will be played

back in succession.

To stop scanning, press the SCAN button and

deactivate the Scan mode.