42-EN
Information
Indication for XM Radio Mode
• The XM antenna is not connected to the XM radio
module.
- Check whether the XM antenna cable is attached
securely to the XM radio module.
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
• XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger
signal.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
• The channel currently selected has stopped
broadcasting.
- Select another channel.
• The user has selected a Channel Number that does not
exist or is not subscribed to.
- The unit will revert back to the previously selected
channel.
• There is no artist name/feature, song/program title, or
additional information associated with the channel at
that time.
- No action needed.
ANTENNA
UPDATING
LOADING
NO SIGNAL
OFF AIR
– – – – – –
To Next Page
Loading...
