SETUP
4
After
setting, press and
hold
SETUP
for
at least 2
seconds.
Save
the
setting
to
exit
the
setting
mode.
19.EN
o When settings are changed, old settings are overwritten. Make a
note
of
the current settings before making changes. The settings are
not cleared even when the vehicle's battery is disconnected.
Setting
the
language
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (Not all discs
allow changing the default language.
If
not, the factory default
language applies.)
Setting
Items: LANGUAGES
---7
AUDIO / SUBTITLE/ MENU
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the subtitles displayed on the screen.
MENU:
Set the language used for the menus (title menu, etc.).
Setting
contents:
AUTO
0'
(Initial
setting)
/
OFF
*2 (SUBTITLE
only)
/ ENGLISH /
FRENCH/ JAPANESE/ ITALIAN/ GERMAN/ SWEDISH /
SPANISH / CHINESE / OTHERS
*3
*1
AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
*2 OFF:
Subtitles are not displayed. (SUBTITLE only)
*3
OTHERS:
Set this to play the
disc
with a language other than one of
the languages displayed. Press
ENT.
, then use the
numeric keypad ("0" to "g") to input the 4-digit language
code. Then press ENT. again. For the language codes,
refer to "List of Language Codes"
(page
30).
•
If
you change the language setting when the disc is inside, the
setting is decided with one
of
the following operations.
-Magazine (disc) eject.
-Tum OFF the main unit.
-Switch the source on the head unit.
•
To
temporarily change the language
of
the current disc, either do
so from the DVD menu
or
using the operation described
in
the
section "Switching the Audio Tracks" (page
14).
•
If
the disc does not include the selected language, the disc's default
language is set.
o Languages set upon shipmentfrom thefactory:
Audio language: AUTO
Subtitle language: AUTO
Menu language: AUTO
o Press
RETURN
to return to the previous display.
SETUP
ENT.
....
...
~
RETURN
T
!+II
~
•
Numeric
CLR
keypad
(0
to
9)
CO
CONTENTS SETUP
AUDIO
SETUP
.SETUP
Use steps 1
to
4
to
select
one
of
the
SETUP
modes
to
modify. See
the
applicable section below
for
details
about
the
selected SETUP item.
2 Press A
or
T
to
select
the
desired
setup
item, then
press
ENT.
Setting
items:
SYSTEM SETUP / DVD CONTENTS SETUP /
CD CONTENTS SETUP / AUDIO SETUP
3 Select
setting
items
or
setting
contents
you
want
to
change
in
the
selected setup
by
pressing
A,
T,
~,~,
and
press
ENT.
Setting
items
SYSTEM SETUP:
BACK PICTURE I
TV
SCREEN(ASPECT I
TV
SYSTEM) I
AUTO DISC CHANGE I VIDEO DELAY I MODEL SETUP I
SETUP INITIALIZE
DVD CONTENTS SETUP:
LANGUAGES(AUDIO I SUBTITLE I MENU) I
PARENTAL
(PASSWORD
---7
COUNTRY CODE I
PARENTAL
LEVEL I
CHANGE PASSWORD) I DVD-A
PLAY
MODE I
DVD-VR
PLAY
MODE I BONUS CODE I MAIN STORY I
AUTO DVD MENU
CD CONTENTS SETUP:
CD PLAY MODE I VCD PLAY MODE I
COMPRESS
PLAY
MODE(PRIORITY MODEl
COMBINATION MODE I JPEG STILL MODE) I
AUTO DISPLAY I REGISTRATION CODE
AUDIO SETUP:
DIGITAL OUT(DOLBY D/DTS) I DOWNMIX MODE
You
can perform setup operation when disc playback is
stopped
(STOP), or no disc is inserted in the magazine
while the car is stopped.
1 Press and
hold
SETUP
for
at least 2 seconds.
The
SETUP
menu
is
displayed.
You
can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, System Setting, Audio Setting, etc.
can be modified.
SETUP
Operation
To Next Page
Loading...
