Other
Useful
Features
CHtt--
V.OUT
To
output
DVD
VIdeo
While
Ustenlng
to
Another
Source
(CD/radio,
etc.)
(only
when
using
AI-NET)
When the DHA-S690 is connected to an Ai-NET compatible head
unit or Ai-NET compatible
AV
head unit, DVD video can
be
output
independently on the monitor.
If
the rear monitor is connected, DVD video and audio can be output
independently on the rear monitor.
For example, DVD video can
be
output on the front or rear monitor,
while listening to the CD/radio from the head unit.
1 Change the source on the head unit or
AV
head
unit to CD
or
radio, etc.
2 Select the DVD image from this unit with the V.SEL
(VISUAL) (use the Simultaneous Function) on the
AV
head unit or front monitor.
3 Press V.OUT on the remote control for this unit.
You
can watch the DVD/video CD.
4 After using this function, press and hold V.OUT for
at least 2 seconds to deactivate the video output
mode.
24.EN
To
watch the DVD on the rear monitor
5 See "Rear Monitor Select Function (AUX OUT)" In
the
AV
head unit or front monitor's owner's manual
to select the DVD image from this unit.
Caution
If
the
power
or
the ignition key is turned
off
without canceling the
video output mode, the set will start up in the video output mode
the next time the
power
is turned on,
and
the DHA-S690's
power
will remain
on
even
if
the source is switched with the
head
unit!
AV
head
unit
or
if
you try to
tum
off
the
power
of
the DHA-S690.
If
this happens, press
and
hold
V.OUT
for
at
least 2 seconds to
cancel the video output mode.
•
If
the monitor has no rear monitor selectfunction, the rear monitor
cannot be connected.
• Buttons to operate, etc., vary depending
on
the product. Refer to
the owner's manual
of
the connected product
for
details.
Setting
the
wallpaper
A data file downloaded from the ALPINE Owner's website is written
to a CD-R1CD-RW disc, and the disc is inserted into the DHA-S690,
and then is saved in either "AREA
I"
or
"AREA 2".
The wallpaper file can be saved and displayed as long as a disc is not
inserted (in the magazine), or while playing a CDIMP3IWMNAAC
audio, or
if
a DVD disc is stopped.
•
If
severalfiles are stored in a disc, only the first file will
be
stored
on the unit.
1 Load a CD-RlCD-RW disc containing data
In
the
magazine.
The
UPDATE
screen is displayed.
2
Press'"
or T to select an area (AREA 1
or
AREA 2)
you want to save, and then press
ENT.
A wallpaper is saved
in
the selected AREA.
3 If you want to change the wallpaper, press and hold
ENT. for at least 2 seconds while the unit Is
stopped.
•
up
to 2files can be stored
on
this unit.
If
the 3rdfile is
downloaded, the firstfile is overwritten
and
new one memorized.
•
To
change the wallpaper, press
and
hold
ENT.
for
at
least 2
seconds while no disc is inserted (in the magazine
J,
or
while STOP
is
set
in disc mode.
• Even
ifthe battery
power
cable is disconnected, the downloaded
data is
not
cleared.
To Next Page
Loading...
