Setting the Country Code
Set
the
country
code
when
setting
the
rating level (Parental lock).
Setting items: PARENTAL
~
PASSWORD
~
COUNTRY CODE
Settmgconmn~:AUTO/OTHERS
AUTO: The country code memorized
in
the disc
is
set.
OTHERS: Select this if the desired country code
is
input.
To
change the Country Code:
Use the numeric keypad ("0" to "9") to input the 4-digit
country
code.
then press ENT.
Example: US "8583" is input
COUNTRY CODE 8583
o
If
the input code is wrong, "CODE ERROR" is displayed and the
unit returns
to the setup display again.
o
For
the country codes, refer to "List
of
Country Codes" (pages 31
and 32).
o One digit can be erased at a time each time
CLR
is pressed.
Pressing and holding
CLR
for
at least 2 seconds will delete all
digits.
o Pressing
RETURN
will return to the previous screen.
Setting the Rating Level (Parental Lock)
Use
this function
to
restrict
the
viewing
of
movies to children
of
appropriate
age
levels only.
setting items:
PARENTAL
~
PASSWORD
~
PARENTAL
LEVEL
Setting contents: OFF(Initial setting)/
8-1
1 Use the numeric keypad ("0" to "9") to input the
4-digit
password, then press ENT.
Input
numbers
are displayed as
"*."
The default password is 1111
upon
shipment from the
factory.
The restriction level (PARENTAL LEVEL) input
display
appears.
o One digit can be erased
at
a time each time
CLR
is pressed.
Pressing and holding
CLR
for
at least 2 seconds will delete all
digits.
o Pressing
RETURN
will return to the previous screen.
o
If
the password is wrong. the unit returns
to
the SETUP display.
2 Press
.....
~
or ENT. to select the restriction level (8 to
1). then press ENT.
Select "OFF" to
cancel
the parental lock or if you
do
not
want to set a rating level.
The lower the number. the higher the rating level.
o Press
RETURN
to return to the previous display.
Change the Password
If
you want to
change
the
password, select
"CHANGE
PASSWORD",
then
input
the
new
password
(4 digits).
setting items:
PARENTAL
~
PASSWORD
~
CHANGE
PASSWORD
Setting contents: PASSWORD
Input
Use the numeric keypad ("0" to "9") to input a 4-digit
new
password, then press ENT.
o Write down the password on a piece
of
paper and store the piece
of
paper somewhere in case youforget
it.
o On unrated DVDs, playback will not be restricted even ifthe rating
level is set.
o Once set, this rating level remains in memory until changed.
To
enable the play
of
discs
of
higher rating levels or to cancel the
parental lock, the setting must be changed.
o Not all DVDs provide a Parental Lockfearure.
If
you are unsure
about a
DVD.
play
itfirst
to confirm. Do not leave DVDs
accessible to young children
for
whom you deem them
inappropriate.
20.EN
Tips
o Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen "PARENTAL
LEVEL CHANGE OK?"
o
To
change parental level
and
play, press
ENT.
o
To
play without changing the parental level, press
•.
(When.
is pressed, playback will be
at
the parental level
set with "Setting Parental Lock". )
Setting the
DVD
Audio Playback Mode
To
playback
the
DVD
Audio Disc, you
have
a choice
of
3 different
settings.
If
the
disc containing
DVD
Video
and
Audio,
set
VIDEO ON
or
VIDEO
OFF to playback
the
DVD
Audio.
setting
item: DVD-A PLAY MODE
Setting contents: DVD-V/ DVD-A
*
*DVD-A
~
VIDEO
ON
(Initial
setting)
I
VIDEO OFF
DVD-V: Plays back the
DVD
video portion of a disc
containing both
DVD
video/DVD audio.
VIDEO ON: Plays back
DVD
audio with images also.
VIDEO OFF: Plays back only the audio portion of a
DVD
audio disc (no image
is
output).
Setting the
DVD-VR
Playback Mode
You
can
set
the
playback method whether for original Program
DVD-
VR disc playback or a playlist edited by another
DVD
recorder.
Setting item: DVD·VR PLAY MODE
Setting contents: ORG PGC PLAY (Initial
setting)!
PLAYLIST PLAY
ORG PGC
PLAY:
Plays back only
an
original program.
PLAYLIST
PLAY:
Plays back only a playlist.
Playing the Bonus Group
In addition to
the
usual
group,
DVD
Audio
also
includes
an
addition
Bonus Group.
When
the
Bonus Group
is
selected,
although
the
password input
screen
is
displayed, you
can
pre-input a 4-digit
password.
Setting item: BONUS CODE
setting
content: BONUS CODE
Input
(The
initial
setting
Is "0000")
Press ... or T to select "BONUS CODE", then press
ENT.
2 Use the numeric keypad ("0" to "9") to input 4-digit
password. then press ENT.
o One digit can be erased
at
a time each time
CLR
is pressed.
Pressing and holding
CLR
for
at least 2 seconds will delete all
digits.
3 When the setting is complete. press
and
hold
SETUP
for at least 2 seconds.
The setup returns to normal mode.
o
If
the Bonus Group password differs from the password in the
section you set. the input screen
is
automatically displayed.
To Next Page
Loading...
