Connections
Cable
Color
Cable
Specifications
Fuse Yellow
IBATIERyl
(SA)
Yellow·
Battery
Lead . . .
Connect this lead to the positive
(+)
post of the vehicle's battery.
Red
IIGNITION I
•
Switched
Power
L.ead
(Ignition)
Red Connect this lead to an open terminal on the vehicle's fuse box or
another unused power source which provides (+)12V only when the
ignition is tumed on
or
in
the accessory position.
When connecting with the Ai-NET compatible AV head unit or the
Ai-NET compatible head unit, do not connect the ignition lead.
----0
Ignition
Key
• Remote
Control
Eye
Jack
Connect this to the remote control sensor unit. Not used when using
---n-1
Remote 0
1
Eye
a monitor with a buin-in remote control sensor unit. A remote control
sensor unit
is
needed when a monitor
or
navigation unit made by other
company is connected.
White/Brown
IREMOTE
IN
I
I
.....
-.:.:.:.::::::.:::.:::.::~=====!.....clll!i!l
White! • Remote
Control
Input
L.ead
Brown This lead is used
in
combination with the Ai-NET compatible AV head
unit or the ALPINE monitor with a remote control output lead.
•
Ground
L.ead
Connect this lead to a good chassis ground on the vehicle. Make sure
the connection is made to bare metal and is securely fastened using
the sheet metal screw provided_
• Ai-NET
Connector
Connect this to the output
or
input connector of other product equipped
with Ai-NET.
_.___
To
remote
control
output
lead
___
.,
Connect
to
a metal
part
of
chassis
body
with
a
screw
'-----I@I
Yellow
White(L)
Red(R)
• Digital
Output
Terminal (Optical)
This terminal is used to connect DHA-S690 to ALPINE digital audio
processor (PXA-H700,etc.).
An optional fiber optic cable that will plug directly into the Digital Output
Terminal of the DHA-S690.
•
Video
Output
Connector
This connector is used
in
combination with the video inputs of another
video product (AV head unit
or
TV monitor).
•
Audio
Output
Connectors
This output may
be
connected to a Rear Monitor with a volume control
or an auxiliary audio preamp.
This is used to monitor the DVD audio while the main audio system is
being driven by another source (such as Radio
or
CD).
• S
video
Output
Terminal
Outputs S video signal.
Connect to the input terminal of S video of connected devices.
• Connect properly. Never connect to parts other than the ones indicated in these operating instructions.
• Also refer
to
the operating instructions
of
the other products in the system.
40.EN
To Next Page
Loading...
