Returning
to
the Initial Setting
You
can return the contents you previously set to the initial factory
settings.
setting
Item: SETUP INITIALIZE
setting
contents:
YES
/ NO
YES: Returns to the initial setting.
NO: Does not returns
to
the initial setting.
CD
CONTENTs
SETUI?
• When settings are changed, old settings are overwritten. Make a
note
of
the current settings before making changes. The settings are
not cleared even when the vehicle's battery is disconnected.
Playing MP3JWMAtAAC/DivX® Data
Setting item: CD PLAY MODE
Setting
contents:
CD-DA / COMPRESS (Initial setting)
This unit can play back CDs containing both CD and
MP3IWMN
AAClDivXG'
data (created
in
Enhanced
CD
(CD Extra) fonnat).
CD-DA: Only CD data can be played back.
COMPRESS: Only
MP3(WMNAAC/DivX~
data can be played
back.
Setting the Video CD Play Mode
When playing a Playback Control
(PBe)
enabled video CD, you can
choose to set PBC
ON
or OFF.
Setting item: VCD PLAY MODE
setting
contents:
PBC ON (Initial setting)/ PBC OFF
PBC ON: The
PBC
menu
is
displayed.
PBC OFF: The
PBC
menu is not displayed.
Setting Compression Playback Data
If
a disc contains both video and audio compression files, you can set
to play back only video or audio.
Setting
items:
COMPRESS PLAY MODE
--t
PRIORITY MODE
setting contents: ALL (Initial setting)/ AUDIO
ONLY
/
VIDEO
ONLY
ALL: Plays back audio and video
in
the recorded
sequence.
AUDIO
ONLY:
Identifies and plays
an
MP3(WMNAAC file.
VIDEO
ONLY:
Identifies and plays a
DivX~/JPEG/ASF
file.
Setting Playback simultaneously
The function allows you to play back a IPEG still screen along with
attached audio.
setting
items: COMPRESS PLAY MODE
--t
COMBINATION MODE
Setting
contents:
OFF(Initial
setting)
/ AUDIO WITH JPEG */
JPEG WITH AUDIO *
OFF:
The
function is set
to
OFF.
AUDIO WITH JPEG: Plays back
an
audio file simultaneously
attached to a
JPEG
(still screen) file.
When the audio file is played back, only
the audio file is counted
as
a file number.
JPEG WITH AUDIO: Plays back a
JPEG
(still screen) file
simUltaneously attached with a audio file.
When the
JPEG
file is played back, only
the
JPEG
file is counted
as
a file number.
Setting
contents:
* AUDIO WITH JPEG
--t
NORMAL /
RANDOM
* JPEG WITH AUDIO
--t
NORMAL /
RANDOM
NORMAL: Plays
in
the disc's track order.
RANDOM: Played back the disc randomly.
22.EN
SettingTime
for
Still Image Playback
If you set playback time for still image (JPEG file), images are
continuously played back (slide show).
setting
Items: COMPRESS PLAY MODE
--t
JPEG STILL MODE
setting
contents: MANUAL /
SET
TIME
(1-120
sec)
(The
initial
setting
is
5 sec)
MANUAL: Plays back with still image. Pressing
~
or
~
will play back the next
JPEG
file, or return to the
previous
JPEG
file.
SET TIME: Using the numeric keypad input, you can set
playback time between 1 and 120 seconds (slide
show playback).
Setting the Display
The disc usage conditions described in "Displaying the Disc Status"
(pages 15, 17) are displayed on the wallpaper, or the upper part
of
the
image during playback. (Except DVD video, DVD audio, DVD-VR,
Video CD)
Setting item: AUTO DISPLAY
setting
contents:
OFF/ ON (Initial setting)
OFF: Usage status
is
not displayed.
ON: When a disc is played back, usage status of the disc to
be played back is displayed on the wallpaper or
in
the
upper part of the image.
(When
DivX~,
JPEG
or
ASF
discs
are
played back, the
disc status
is
displayed for 3 seconds.)
Displaying the
DlvX®
registration code (DivX)
Displays the registration code and support version
of
the
DivX~.
Setting item: REGISTRATION CODE
• Selecting "RETURN" on the registration setting screen will return
the previous display.
• When settings are changed, old settings are overwritten.
Make
a
note
of
the current settings before making changes. The settings are
not cleared even when the vehicle's battery is disconnected.
Setting the Digital Output
Use the following procedure to set the digital audio signal output
from the DHA-S690.
setting
Item: DIGITAL
OUT
Output
Modes: DOLBYD / DTS
DOLBY
0:
Sets Dolby Digital output.
The initial setting
is
BITSTREAM.
DTS: Sets
DTS
output.
The initial setting is BITSTREAM.
setting
contents:
BITSTREAM/ LPCM
BITSTREAM:
The
digital output is switched automatically
according to the type of audio signal being
played.
Be sure to select "BITSTREAM" when you want
to
connect a digital audio processor and play
Dolby Digital audio. "BITSTREAM" is selected
upon shipment from the factory.
LPCM: The audio signal recorded on the disc
is
converted
to
48 kHz/16 bit (for DVDs) or
44.1
kHz (for video CDs and CDs) linear
PCM
audio signals for output.
• Pressing
RETURN
will return to the previous screen.
To Next Page
Loading...
