DISC ERROR
• Mechanism error.
I) Press
~
and eject the magazine (disc).
If the disc does not eject, press
~ again for at least 3
seconds and eject the magazine (disc).
If the disc still does not eject, consult your Alpine dealer.
2)
When the error indication remains after ejecting, press
~
again.
If
the error indication still does not turn off after pressing
~
a few times, consult your Alpine dealer.
• The temperature
in
the car
is
too
low.
- Raise the temperature in the car to normal temperature.
NO DISC
• No disc is inserted.
- Insert a disc.
• Remote control operation
is
not possible.
- For some discs'or playing modes, certain operations are not
possible. This is not a malfunction.
(When the red
0 indicator
is
displayed, disc operation
is
prohibited.
When the white
0 indicator is displayed, unit playback is
prohibited.)
REGIONAL CODE
VIOLATION
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
HI-TEMP
• Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
34.EN
LOADING ERROR
EJECT ERROR
• Mechanism error.
I) Press
~
and eject the magazine (disc).
If
the disc does not eject, turn the power offonce and then
on again, then press
~
for at least 3 seconds and eject the
magazine (disc).
If
the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
~
again.
If
the error indication still does not turn off after pressing
~
a
few
times, consult your Alpine dealer.
VIDEO SIGNAL
SYSTEM IS NOT
CORRECT
• Displays
if
a disc differs from the setting on the device.
- Sets
in
"Setting the TV System" (page 21).
To Next Page
Loading...
