TRANSMISSION & DISTRIBUTION
High voltage switchgear
PS 0006/A 02 1996-04-04 1998-08-12 2 / 2
Sheet N° Revision 1st issue Revision date Page
SAFETY INSTRUCTIONS
PACKING
TRANSPORT
INSTALLATION
START-UP
OPERATION
MAINTENANCE
SCRAPPING &
RECYCLING
1 High Tension.
1.1 Comply with the regulations governing the work station. XXXXX
1.2 In the case of items equipped with capacitors, make
sure they are discharged prior to removal and short-
circuited while work is being carried out.
XX
2 Low Tension.
2.1 Prior to any work on the low-tension circuit or
equipment, cut off the power supply.
XXXXX
2.2 When replacing an electrical component on the control
equipment, follow the safety instructions shown in the
"Machinery" safety sheet.
XX
To Next Page
Loading...
